Palezzo

Yes, Palezzo can be installed on vertical surfaces like natural stone or ceramic. Zero joints can be applied so they are least apparent.

-If Palezzo is poured on site, the floor should be dry (max humidity 4%), on the scale (max undulation for 20 m2 is 1-2 mm) and the screed quality at the lower level should be in the C35 concrete standard.
-The dryness condition of the ground is not required for the tiles installation.

Yes, It can be poured on 45-50 m2 surface without joints. Usually the joints locations are selected adequately to your project’s plan.

Just like the natural stone. The weight of Palezzo is:
- 55-60 kg/m2 for of 20 mm thick slabs,
- 28-30 kg/ m2 for 10 mm thick slabs,

No, you can order a coffee table top as you can also pour thousands of square meters of Palezzo.

Palezzo can be easily cleaned by using natural and non-chemical detergents and its absorbency is less than natural stone. The epoxy base doesn’t get stained, but the stones should be cleaned immediately.

It can be polished, honed or slightly brushed just like the natural stone.

Since Palezzo has a low UV resistance, it turns yellow over time when it receives direct sunlights.
However, it can be used under eaves, pergolas or in semi-enclosed spaces.
For those who prefer to use it exposed to direct sunlights, it can be applied in anthracite-dark gray colors with a special protective lacquer layer.

• Palezzo is mostly 20 mm thick since it’s made with 10-20 mm thick stones.
• If, it’s not a palladian type or there are no large stones and it’s poured on site then we can pour 12 mm that remains 10 mm once grinded.
• It is possible to make thinner Palezzo by calibration.

The color options of the epoxy matrix are endless, you can choose your color from the desired color chart.

Palezzo can be made in solid casting then cut to the desired size, volume and shapes.

Yes, depending on the project and the radius values of the curve, curvilinear surfaces can be obtained by molding it or using other methods.

All edge process made on natural stone can be applied on Palezzo, such as eased or pencil edge, bullnose, ogee or even miter.

Max slab size is 120x240 cm.
The slab sizes are decided in accordance with the project or in the desired
dimensions.

Aluminum, stainless steel, zinc or brass can be selected as joint materials for the on-site poured floor applications.

Palezzo is an inert material, it does not react chemically with any element.
If a virus or a bacteria falls on it, it can survive maximum 20 seconds.

We design and produce our Palezzos not only with stones, but also using glass, metal and hard baked wood.

Palezzo is an environment friendly material. Our approach is to use our natural stones and their waste as a priority. Since Palezzo is a brand of Stoneline, our stone options are very diverse, we can recommend options according to the chosen stones and base color preferences.